Menu
Call (484) 380-7228
Chimney Parts

Chimney Liner Installation Bryn Mawr, PA

A chimney sweep in Bryn Mawr can install a new liner in a flue that is unlined, cracked or the wrong size with a liner sized to the appliance and insulated where the system calls for it. Call (484) 380-7228 to reach a local chimney sweep.

A chimney liner is the channel inside the chimney that carries smoke and combustion gases up and out. A sound liner shields the masonry from acids and heat, keeps fire away from the structure and sizes the flue so smoke moves efficiently. Some older chimneys were built unlined, and others have clay tiles that have cracked over the decades.

Relining usually comes up for one of a handful of reasons. The original clay tiles may be cracked from age, settling or a chimney fire, or the chimney may never have been lined. Changing appliances is another big one, because a flue sized for an old fireplace is usually too large for a modern insert or furnace.

Before relining, the chimney should get a thorough inspection, usually a Level 2 inspection with a camera run up the flue. The inspection tells you whether relining is truly needed and what kind of liner suits the chimney. Seeing the inside of the flue makes the decision much easier.

Depending on what the sweep finds, chimney liner installation in Bryn Mawr, PA can go hand in hand with chimney liner repair and chimney inspection.

Dealing with this in Bryn Mawr, PA right now? Call (484) 380-7228 and describe the problem to a chimney sweep who works in Bryn Mawr.

Call now
The process

The chimney relining process

Here is how a sweep usually handles a liner installation.

  1. Camera inspection

    A camera is run through the flue to check the existing tiles, offsets and obstructions. The findings shape the rest of the job.

  2. Measure the flue

    The right diameter depends on the stove, insert, furnace or fireplace being vented. The full height of the flue is measured too.

  3. Clear the path

    The flue is swept and any loose tile or obstruction is cleared so the liner can pass. The path from top to bottom has to be clear.

  4. Feed the liner

    The stainless liner is lowered from the roof down to the appliance, often wrapped in an insulation blanket. Insulating it helps draft and reduces creosote and condensation.

  5. Connect the appliance

    A tee or connector joins the liner to the appliance, and a top plate seals the crown. Every joint is secured so gases stay inside the liner.

  6. Confirm venting

    A draft test confirms the new liner is working. Make sure working CO alarms are in place near sleeping areas.

What is included

What chimney liner installation covers

Rigid stainless liners

A rigid liner is heavier and smoother inside which suits wood burning appliances well.

Poured liners

Cast in place liners are formed inside the old chimney with a heat resistant mix in a single solid lining.

Furnace flue liners

A properly sized liner for a water heater left alone after a furnace upgrade to keep combustion gases moving out of the house.

Flexible stainless liners

Flexible stainless steel liners bend around offsets in the chimney and come in grades matched to the fuel.

Insulated liners

Liners can be insulated with a blanket or a poured mix where the system or chimney calls for it.

Related service

Stainless Steel Chimney Liner Bryn Mawr, PA

A stainless steel liner is the standard choice for most homes that need a new flue. It comes in flexible coils for chimneys with bends and rigid sections for straight flues. Liners are sold as tested systems, with grades suited to wood, gas or oil.

Insulation around the liner helps flue gases rise and keeps the outside of the chimney cooler. At the top, a sealing plate and cap keep rain and animals out. In Bryn Mawr, a stainless liner is a common upgrade when installing an insert or wood stove.

Related service

Chimney Relining Bryn Mawr, PA

Chimney relining is the process of lining a flue again when the original liner is cracked, missing or unsuitable. It is often recommended after a chimney fire, when clay tiles crack, or when a new appliance needs a different flue size. Relining is usually far less disruptive than rebuilding the chimney.

Have a list of everything that uses the chimney ready when you call (484) 380-7228. If the furnace was upgraded recently, the water heater may now be venting into a flue that is too large. A smaller liner brings the draft back where it should be.

Local help

Chimney Liner Installation Near Me

Around Bryn Mawr, relining usually comes up when a home changes heating appliances or an inspection turns up cracked tiles. Homes in Bryn Mawr and neighboring towns like Rosemont, Ardmore, Villanova and Narberth often switch to inserts, stoves or high efficiency furnaces, which changes what the flue needs, which is why relining is one of the most common chimney upgrades in the area.

For chimney liner installation in Bryn Mawr, PA or nearby towns like Rosemont, Ardmore, Villanova and Narberth, call (484) 380-7228 to reach a chimney sweep who covers your street.

What the local climate does to a chimney

Cold winters keep fireplaces, wood stoves and oil burners working for half the year or more. Masonry takes the worst of it from the freeze and thaw cycle: rain and melting snow soak into the crown and joints, then freeze and push them apart, and each winter widens the cracks a little more. Nor'easters drive rain sideways into flashing and mortar that looked fine in summer. Most homeowners in Bryn Mawr, PA schedule a sweep in early fall, and a repair check after a hard winter.

Why call

Why fix it now

Smaller repairs

A chimney problem fixed early rarely spreads to the masonry, the liner or the house.

Sweeps who know Bryn Mawr

Local sweeps see the same chimney types and weather wear across Bryn Mawr and nearby towns.

Straight answers

Ask the sweep about the cause, the options and the estimate before work starts.

Common questions about chimney liner installation

How long will a new chimney liner hold up?
A stainless steel liner is a long term fix when it suits the fuel and is kept clean. Burning dry wood and having the liner inspected regularly protect it. The liner manufacturer usually gives guidance on care.
Does a fireplace insert need a liner?
NFPA 211 expects a positive connection from the insert to the flue, and a full length liner is the common way to do it. Skipping the liner tends to cause draft trouble and creosote. The sweep sizes the liner from the insert specifications.
What does a chimney liner do?
The liner is what contains the heat and gases from the fire or appliance. Fire codes and safety standards expect chimneys serving fireplaces and appliances to be lined. An inspection shows whether your current liner is in good shape.
Why does my water heater flue need relining after a furnace upgrade?
After a furnace upgrade, the water heater may be the only thing left using a flue that was sized for two appliances. The oversized flue lets gases cool and condense, which weakens draft and wears out mortar. A smaller liner sized for the water heater fixes it, and working CO alarms are essential in the meantime.
What is the difference between a clay liner and a stainless liner?
Clay tile liners are built into the chimney when it is constructed and last a long time if they stay intact, but they can crack from heat shock, settling or a chimney fire. Replacing clay tiles with new clay means rebuilding, so stainless is the common choice for relining. A sweep can tell you whether repair or relining makes more sense.

More questions? Call (484) 380-7228

Other services that may help

  • Chimney Liner Repair

    Repairing cracked clay flue tiles, open joints and damaged liners with resurfacing, joint repair or partial replacement.

    Learn more
  • Chimney Inspection

    An annual look at the flue, firebox, damper, crown and cap so you know whether it is safe to light a fire.

    Learn more
  • Fireplace Insert Installation

    Installing wood, gas and pellet inserts in existing fireplaces, so more heat stays in the room instead of going up the flue.

    Learn more
  • Wood Stove Installation

    Wood stove installation into an existing chimney or a new insulated chimney, following the stove manual and local code.

    Learn more

Looking for something else?

See all chimney services

Need chimney liner installation in Bryn Mawr, PA?

Call (484) 380-7228 for a local chimney sweep in Bryn Mawr and nearby towns.

(484) 380-7228

Free to call. No forms to fill out.

Call (484) 380-7228